-
Polyurethane Absorber Bump Shock Absorber Dust Prptection Kit For Toyota Auris 2006-2012 OE 8K0 412 137A
Feature 1) Protect the suspension system. 2) Ensure driving safety and increase passenger comfort 3) Raise the body about 1-3 cm to increase the stability of the car when passing the road 4) When the car takes a sharp turn at high speed, the buffer can adjust the damping spring by itself to avoid the car from over-tilting and ensure safety. 5) Reduce the fatigue of long-distance driving and make driving a pleasure 6) Shorten the braking distance and increase the safety. Detail Longer service ... -
Polyurethane Dust Cover Kit Shock Absorber Buffer Air Shock Absorber Bump Stop For Toyota Yaris OE 1J0 513 425/A
Feature (1) No sliding parts, easy to maintain; (2)Small quality, easy installation and disassembly; (3) The elastic modulus is much smaller than that of metal, which can produce large elastic deformation; (4)The impact stiffness is higher than the static stiffness and dynamic stiffness, which is beneficial to impact deformation. (5)The internal friction is large, and the shock absorption effect is good, which is conducive to crossing the resonance area and attenuating high-frequency vibrat... -
Front Shock Absorber Bump Stop Dust Cover Kit for Toyota OE 8RD 512 131
Feature Improve braking efficiency. Reduce noise and vibration while driving Improved driving comfort and more stable steering. Reduced absorber pumping when passing over road humps. Protect shock absorbers and suspension systems from oil leaks. Sizes for all types of cars, including lowered springs and adjustable. Improve the performance of the shock absorber and effectively solve the problem of the weak spring under heavy load. Detail The damping block has sufficient rigidity in the vert... -
For Corolla 2004/06-2007/02 Absorber Bump Shock Strut Boot Bellows Crash Rubber (For: Toyota) OE 8K0 512 137A
Feature 1. Effectively solve problem of springs weakness when heavy load & improve performance of shock absorber. 2. Improve driving comfort and more stable during curve corner. 3. Reduce pumping of absorber when passing through road hump or yellow line. 4. Reduce noise and vibration during traveling. 5. Protect shock absorber and suspension system to avoid oil leak. 6. Extend absorber life more than 2 times. 7. Improve braking efficiency. Detail Enhancing Stability: The buffer rubber h... -
For Toyota Polyurethane Absorber Bump Shock Absorber Rubber Buffer OE5Q0 513 425J/H
Feature (1) Comprehensively improve driving stability, enhance driving comfort, and enjoy driving pleasure; (2) It can reduce the vibration of the body to a limited extent and absorb the noise of the suspension system; (3) Solve the problem of weak spring and increase the body by 0.2-0.3 cm, but it cannot effectively improve the bearing capacity; (4) Limited buffering and absorbing the instantaneous pressure caused by the rough road to avoid damage to the shock absorber system (Warning: Excee... -
Front Shock Absorber Bump Stop Dust Cover Kit for Toyota:AVENSIS,COROLLA
Feature 1.Comprehensively improve driving and driving, enhance driving comfort, enjoy driving pleasure; 2.It is possible to achieve weak body vibration, absorb the noise of the suspension system; 3.Solve the problem of spring weakness, improve the body 0.2-0.3 cm; 4.Limited buffering and absorption of momentary pressure caused by rugged road, avoid damage to shock absorption systems 5.Helps reduce vibration of car body and absorbing noise from suspension system, enhancing comfort and safety ... -
PU Shock Absorber Strut Bump Stop Kit Toyota Avensis 2003- 2008 OE 8KD 412 131
Feature Dust Boots The dust cover is used to protect the shock absorber piston rod to keep it smooth/clean at all times, so that the piston rod is not contaminated by dust, and at the same time, it does not allow the oil seal to be eroded by sediment, so as to prevent the oil seal and piston rod from aging and losing the buffer capacity. If the dust jacket is aging and damaged, the shock absorber should be replaced together. If the shock absorber is no problem, the dust jacket should be repla... -
Polurethane Absorber Bump Shock Absorber Dust Boot Cover with Bump Stop (Set Of 2) For Toyota 4B0 512 137B
Feature The polyurethane shock-absorbing block has sufficient rigidity in the vertical direction to ensure small deformation under large vertical loads. The rubber block has a certain elasticity in the horizontal direction, and can adapt to the horizontal displacement of the beam caused by the braking force, temperature, concrete shrinkage, creep and load, and the rubber block can also adapt to the rotation of the bridge. (1) The shape can be freely determined, and the hardness can be control... -
For Toyota Polyurethane Absorber Bump Shock Absorber Buffers PU Damping Block And Buffer OE 1J0 512 131B
Feature 1. Protect shock absorber and suspension system to avoid oil leak. 2.Effectively solve problem of springs weakness when heavy load & improve performance of shock absorber. 3. Reduce noise and vibration during traveling. 4. Improve driving comfort and more stable during curve corner. 5.Reduce pumping of absorber when passing through road hump or yellow line. 6. Extend absorber life more than 2 times. 7. Effectively solve problem of springs weakness when heavy load & improve pe... -
Polyurethane Absorber Bump Stopper Bump Shock Absorber For Toyota OE 7N0 511 359
Feature The damping block has sufficient rigidity in the vertical direction to ensure small deformation under large vertical load. The damping block has a certain elasticity in the horizontal direction, which can adapt to the horizontal displacement of the beam caused by the braking force, temperature, concrete shrinkage, creep and load, and also adapt to the rotation of the bridge. Newly upgraded dustproof and anti-aging, long life and high temperature resistance, made of polyurethane, wear ... -
Toyota Polyurethane Absorber Bump Bumper Stopper Car Shock Absorber
The damping block has sufficient rigidity in the vertical direction to ensure small deformation under large vertical load. The damping block has a certain elasticity in the horizontal direction, which can adapt to the horizontal displacement of the beam caused by the braking force, temperature, concrete shrinkage, creep and load, and also adapt to the rotation of the bridge.
-
Toyota Absorber Bump Dust Cover Buffer Shock Absorption Buffer Noise Reduction
Absorber is mainly used to suppress the shock and impact from the road after suction rebound.Suppress the rapid vibration of the wheels when driving, prevent the tires from leaving the road, and improve the driving stability.
- Email Support info@mikufoam.com
- Call Support 0510-81602871