Absorber Bump PU Automatic Bump Stop Urethane Shock Absorber For Mitsubishi

Feature

1.Comprehensively improve driving and driving, enhance driving comfort, enjoy driving pleasure;
2.It is possible to achieve weak body vibration, absorb the noise of the suspension system;
3.Solve the problem of spring weakness, improve the body 0.2-0.3 cm;
4.Limited buffering and absorption of momentary pressure caused by rugged road, avoid damage to shock absorption systems
5.Helps reduce vibration of car body and absorbing noise from suspension system, enhancing comfort and safety during driving, reducing sag when loaded and helps reduce shocks when bottoming out.

Detail

Dust Cover

The dust cover is used to protect the shock absorber piston rod to keep it smooth/clean at all times, so that the piston rod is not contaminated by dust, and at the same time, it does not allow the oil seal to be eroded by sediment, so as to prevent the oil seal and piston rod from aging and losing the buffer capacity. If the dust jacket is aging and damaged, the shock absorber should be replaced together. If the shock absorber is no problem, the dust jacket should be replaced in time if it is damaged, otherwise the oil seal and piston rod will be corroded and the shock absorber will leak oil.

Absorber Bump

When the vehicle is driving on a complex bumpy road, the shock absorbers and the springs will be compressed to the end, and when the body and the suspension system are in contact with steel, there will be violent bumps and abnormal noises, which will affect the driving and riding comfort. At this time, the buffer block will also be stressed due to high pressure, so as to assist the shock absorption and the spring to play a certain role in mitigating characteristics.

Specification