Volkswagen Absorber Bump Buffer Car Suspension Shock Absorption

Feature

The  absorber bump is a kind of polyurethane product with high elasticity and high toughness, which belongs to the automobile modification accessories. It is used to install at the coil spring of the car suspension system, which mainly plays the role of buffering and shock absorption and protects the car.

(1) Comprehensively improve driving stability, enhance driving comfort, and enjoy driving pleasure;
(2) It can reduce the vibration of the body to a limited extent and absorb the noise of the suspension system;
(3) Solve the problem of weak spring and increase the body by 0.2-0.3 cm, but it cannot effectively improve the bearing capacity;
(4) Limited buffering and absorbing the instantaneous pressure caused by the rough road to avoid damage to the shock absorber system (Warning: Exceeding the limit will damage the shock absorber system).

Detail

Dust Boots
The dust cover is used to protect the shock absorber piston rod to keep it smooth/clean at all times, so that the piston rod is not contaminated by dust, and at the same time, it does not allow the oil seal to be eroded by sediment, so as to prevent the oil seal and piston rod from aging and losing the buffer capacity. If the dust jacket is aging and damaged, the shock absorber should be replaced together. If the shock absorber is no problem, the dust jacket should be replaced in time if it is damaged, otherwise the oil seal and piston rod will be corroded and the shock absorber will leak oil.

Absorber Bump
When the vehicle is driving on a complex bumpy road, the shock absorbers and the springs will be compressed to the end, and when the body and the suspension system are in contact with steel, there will be violent bumps and abnormal noises, which will affect the driving and riding comfort. At this time, the buffer block will also be stressed due to high pressure, so as to assist the shock absorption and the spring to play a certain role in mitigating characteristics.

Specification